| Technical Data | Parameters |
|---|---|
| Material | Steel |
| Maximum Speed | 0.1 m/s |
| Maximum Temperature | 150°C |
| Maximum Load and Motion - Static | 650 N/mm² |
| Maximum Load and Motion - Dynamic | 80 N/mm² |
Product Recommendations
·Housing:Inner diameter H8.
·Bearing: Inner diameter: C8 Outer diamter: n6 alt. u6 for bearing with grease groove and lubrication hole.
·Shaft: -0,02 to -0,05 gives a clearence of 0,10-0,15. Ginded and hardend to al least 54 – 65 HRC depending if you want the wear to be on the bearing or the shaft. Surface roughness Ra minimum 1.6 µ.
Questions You May Be Interested in
Q:What materials are your bushings primarily made of?
A:They are primarily made of gray cast iron, ductile iron, and low-carbon steel (such as Q235). Gray cast iron bushings offer lower cost and better wear resistance, making them suitable for low-speed and light-load applications. Ductile iron bushings offer greater strength and toughness, can withstand greater impact loads, and are suitable for medium- and high-speed transmission equipment. Low-carbon steel bushings can be hardened through heat treatment and are suitable for mechanical structures requiring high precision.
Q:What factors influence the wear resistance and service life of bushings?
A:Abrasiveness is primarily related to material hardness, surface treatment, and lubrication conditions.
Hot Tags: steel bushings, China, suppliers, manufacturers, factory, wholesale, customized